How To Change Wifi For Wyze Camera: Quick Setup Guide

Open the Wyze app, put the camera in setup mode, then re-add it to the new Wi‑Fi.

If you need clear steps on how to change wifi for wyze camera, you’re in the right place. I’ve moved dozens of Wyze cams between routers, SSIDs, and mesh setups. I’ll show you the easiest ways to switch networks, keep your settings, and avoid the common traps that cause failed pairings and timeouts.

Before you start: what matters for a smooth Wi‑Fi switch

Moving a Wyze camera to a new network is simple when you prep well. A bit of setup work saves time later.

• Most Wyze cameras only connect to 2.4 GHz Wi‑Fi. Some newer models support 5 GHz. Check your model’s specs.
• Use WPA2 or WPA2/WPA3 mixed mode. WPA3-only can block older cams.
• Keep SSID visible. Hidden networks can fail at setup.
• Know the exact Wi‑Fi password. One typo can stall the process.
• Update the Wyze app. Check your phone’s OS updates too.
• Power the camera near the router for setup. You can move it after it connects.
• If you keep the same SSID and password on your new router, many devices reconnect without changes. But Wyze cameras often still need a quick re-setup in the app.

Real-world tip: I once spent 20 minutes on a “bad camera” that was actually a WPA3-only network. I flipped the router to WPA2/WPA3 Transition, and the cam joined in under a minute. This tiny change solves many pairing issues.

Method 1: Change Wi‑Fi from the Wyze app without removing the device

This is the fastest way for how to change wifi for wyze camera while keeping rules and names. It triggers a quick re-pair on the new network.

• Open the Wyze app and tap your camera.
• Tap the gear icon, then Device Info.
• Look for Change Wi‑Fi Network. If you see it, tap it.
• Press and hold the camera’s setup button until it says “Ready to connect.”
• Follow the app prompts, select your new Wi‑Fi, and enter the password.
• When asked, show the QR code to the camera lens. Wait for “QR code scanned” then “Connecting.”

Notes from the field:

• This method keeps your device name, event history, and rules.
• If you do not see Change Wi‑Fi Network, use Method 2 below.

Method 2: Set up the camera again on the new network

If your app does not offer a direct change option, re-setup is the reliable path. It is still how to change wifi for wyze camera in a few minutes.

• Plug in and power the camera. Wait for status lights to stabilize.
• Press and hold the setup button until you hear “Ready to connect.”
• In the Wyze app, tap the plus icon, then Add Device, then Cameras.
• Pick your model from the list.
• Select your new Wi‑Fi network and enter the password.
• Show the QR code to the camera until you hear the voice prompt.
• Wait while it connects. Name the camera if asked. If you add it over the old entry, your rules often remain.

Pro tip: Do not delete the old device from the app unless you must. Re-adding over the existing entry preserves schedules and shortcuts for most users I’ve helped.

Model and network notes that save time

A few model quirks affect how to change wifi for wyze camera. These small details can prevent hours of guesswork.

• 2.4 GHz only models: Wyze Cam v2, v3, v3 Pro, Pan v2/v3, OG, Doorbell v1. Keep 2.4 GHz enabled on your router.
• Dual-band capable models: Battery Cam Pro, Floodlight Pro, some newer releases. If 5 GHz fails, try 2.4 GHz for setup.
• Mesh networks: Use a single SSID for both bands. If pairing is flaky, create a temporary 2.4 GHz only SSID for setup.
• Security mode: Enable WPA2 or WPA2/WPA3 transition. Avoid WPA3-only during setup.
• Channel width: 20 MHz on 2.4 GHz is the most stable. Very wide channels can cause drop-offs.
• MAC filtering: Turn it off for setup. If you must use it, add the camera’s MAC from Device Info after it connects.
• Enterprise or hotel Wi‑Fi: These often use captive portals. Bring your own travel router and pair the camera to that network.

Personal note: On a big office mesh, I often create a separate IoT SSID just for cameras. It improves reliability and keeps traffic segmented for security.

Troubleshooting: fix the most common pairing and Wi‑Fi errors

If you hit a wall while trying how to change wifi for wyze camera, try these quick wins.

• QR code will not scan
  • Increase phone brightness and clean the lens. Move the phone 5–8 inches from the camera.
• Cannot find specified network name
  • Make SSID visible. Confirm 2.4 GHz is on. Shorten long SSID names.
• Connection timed out or error code 90
  • Reboot the router and camera. Move closer to the router for setup. Check WPA2 is enabled.
• Stuck at 1/3 or 2/3 in the app
  • Toggle phone Wi‑Fi off and on. Force close and reopen the Wyze app. Try a different phone if possible.
• Wrong password
  • Type the Wi‑Fi password in your Notes app to confirm it. Paste carefully into Wyze.
• Camera offline after network change
  • Unplug and replug the camera. Ensure the router kept the same SSID and security mode.

Advanced tips I use:

• Turn off DFS channels on 5 GHz when pairing dual-band devices.
• Reduce 2.4 GHz interference by moving the router away from microwaves and baby monitors.
• If a firmware update is pending, update after the camera connects to the new Wi‑Fi.

Pro tips to make future Wi‑Fi changes painless

Once you learn how to change wifi for wyze camera, you can plan ahead and save time.

• Keep the same SSID and password when you replace routers. Most devices reconnect fast.
• Make a backup IoT SSID just for smart gear. You can move it between routers easily.
• Document your settings. Save SSID, password, and security mode in a secure place.
• Update firmware on a stable connection. Do not update during a Wi‑Fi move.
• Use a smart plug on the camera’s power. Power cycle fast without reaching the outlet.
• If you move homes, pack cameras with their labels. Note the room and mount type.

I’ve migrated entire homes in under an hour using the same SSID trick plus a clean IoT network. Planning beats troubleshooting every time.

Frequently Asked Questions of how to change wifi for wyze camera

Can I change Wi‑Fi without deleting my camera from the app?

Yes. Use Device Info, then Change Wi‑Fi Network if available. If not, re-run setup and keep the same device entry to preserve rules.

Do Wyze cameras work on 5 GHz Wi‑Fi?

Most use 2.4 GHz only. A few newer models support 5 GHz, but 2.4 GHz is still the safest bet for setup.

What if my router uses WPA3 only?

Switch to WPA2 or WPA2/WPA3 Transition for setup. After the camera connects, you can test stricter modes, but many cams need WPA2.

Why does my camera fail to scan the QR code?

Boost phone brightness and clean both lenses. Hold the phone steady and adjust distance until you hear the scan confirmation.

Will I lose cloud events or rules when I change Wi‑Fi?

If you do not delete the device, your events and rules usually remain. Re-setup through the existing entry to keep settings intact.

How do I move multiple Wyze cameras to a new router fast?

Keep the same SSID and password on the new router. Then re-setup only the cameras that do not reconnect.

Does how to change wifi for wyze camera work the same on iOS and Android?

Yes, the steps are nearly identical. Menu names can vary slightly, but the flow is the same.

Conclusion

You now know how to change wifi for wyze camera with two simple paths. Use the in-app Change Wi‑Fi option when you see it, or re-run setup for a clean switch. A little prep with 2.4 GHz, WPA2, and a simple SSID goes a long way.

Try the steps now while your camera is close to the router. If you found this guide helpful, share it, subscribe for more smart home tips, or drop your question in the comments.