To reset Raycon E25 earbuds, place both buds in the open case and hold their buttons for about 30 seconds.
Raycon E25 earbuds can stop pairing, connect to only one side, or behave oddly after switching between phones. I have found that a full reset usually clears these Bluetooth and syncing problems, but only when the old pairing record is removed too. This guide explains how to reset Raycon earbuds E25 safely, what the LED signals mean, and what to try if the reset does not work.
What a Raycon E25 reset does
A reset returns the earbuds to a fresh pairing state. It clears the earbud connection between the left and right sides and removes stored Bluetooth pairing data from the earbuds.
A reset can help when:
• Only one Raycon E25 earbud produces sound.
• The earbuds connect to the wrong phone.
• Your phone sees the earbuds but cannot connect.
• The earbuds keep disconnecting.
• The left and right earbuds fail to sync.
• The earbuds do not enter pairing mode.
A reset does not repair damaged speakers, a weak battery, water damage, or a broken charging case. Think of it as restarting the earbuds’ connection system, not fixing physical damage.
How to reset Raycon earbuds E25
Follow these steps in order. The timing matters, so avoid releasing the buttons too soon.
-
Charge the earbuds and case for at least 15 to 30 minutes. A very low battery can prevent the reset from starting.
-
On your phone, tablet, or computer, open Bluetooth settings.
-
Find the Raycon E25 entry and choose Forget, Remove, or Forget This Device.
-
Turn Bluetooth off on nearby devices that may connect to the earbuds.
-
Place both earbuds inside the charging case.
-
Leave the case lid open.
-
Press and hold the button or touch control on both earbuds at the same time.
-
Keep holding both controls for about 30 seconds.
-
Release both controls, then close the case lid for a few seconds.
-
Open the case and remove both earbuds together.
-
Turn Bluetooth back on and search for available devices.
-
Select the Raycon E25 from the list.
This is the standard process for how to reset Raycon earbuds E25. Some E25 production versions use slightly different LED patterns or button responses. If your earbuds do not respond after 30 seconds, repeat the process after charging the case and cleaning the charging contacts.
How to forget the old Bluetooth connection
Many failed resets happen because the phone keeps using the old Bluetooth record. Resetting the earbuds alone may not be enough.
On an iPhone, go to Settings, Bluetooth, and tap the information icon beside Raycon E25. Select Forget This Device.
On an Android phone, open Settings, Connected Devices, or Connections. Select Bluetooth, tap the gear icon beside Raycon E25, and choose Forget, Unpair, or Remove.
On Windows, open Settings, Bluetooth & devices, and remove Raycon E25. On a Mac, open System Settings, Bluetooth, select the earbuds, and choose Forget This Device.
After removing the old record, restart your phone. This gives the phone a clean Bluetooth scan and often completes the reset process more reliably.
What the LED lights mean during a reset
LED behavior can differ slightly between Raycon E25 versions. Still, the lights can offer useful clues.
• A charging light usually means the case or earbuds are receiving power.
• A flashing light often means an earbud is searching for a Bluetooth connection.
• A steady light may show that an earbud is charging or has an active connection.
• No light can mean a flat battery, dirty charging contacts, or a case that is not supplying power.
Do not rely on one exact color or flash count unless it matches the manual for your specific E25 version. Raycon has released several products with similar names, and LED patterns are not always identical.
If only one Raycon E25 earbud works
A one-sided audio problem often means the earbuds lost their internal stereo connection. It can also happen when one earbud did not charge.
Try this sequence:
-
Put both earbuds in the case.
-
Check that each earbud sits firmly on its charging pins.
-
Clean the metal contacts with a dry cotton swab.
-
Charge the case and earbuds.
-
Forget Raycon E25 in every nearby device.
-
Reset the earbuds using the 30-second method.
-
Remove both earbuds from the case at the same time.
-
Wait for them to sync with each other.
-
Pair them with your phone only after they finish syncing.
A common mistake is pairing one earbud first. That can create a partial connection and make the second earbud seem faulty. When possible, remove both earbuds together and keep the phone close during setup.
If Raycon E25 earbuds will not enter pairing mode
If the earbuds do not appear in your Bluetooth list, check the simple causes first.
• Confirm that airplane mode is off.
• Turn Bluetooth off, wait 10 seconds, and turn it on again.
• Move away from other active Bluetooth devices.
• Restart the phone or computer.
• Make sure the charging case has power.
• Place both earbuds in the case and remove them together.
• Repeat the reset process with the lid open.
Bluetooth range can also cause trouble. During setup, keep the earbuds within a few feet of the phone. Walls, crowded wireless areas, and several active devices can make pairing less stable.
How to reset Raycon earbuds E25 when the buttons do nothing
A control may appear unresponsive when the earbud battery is empty. Start by charging the case with a known-good cable and power adapter.
Then inspect the charging contacts. Earwax, dust, skin oil, or pocket lint can stop the earbuds from charging. Wipe the contacts gently with a dry, soft cotton swab. Do not pour liquid into the case or scrape the contacts with a metal object.
After charging, place both earbuds in the case and try holding both controls again. If no light appears and the earbuds remain completely unresponsive, the issue may involve the battery, case, or internal hardware rather than Bluetooth.
Common mistakes to avoid during the reset
A reset is simple, but a few small errors can stop it from working.
• Do not hold only one earbud. Both earbuds must reset together.
• Do not close the case during the 30-second hold.
• Do not skip the Forget This Device step on your phone.
• Do not pair the earbuds with another device during the reset.
• Do not assume a dead case can reset the earbuds.
• Do not use sharp tools on the charging pins.
• Do not repeat the reset many times without charging the earbuds.
In practical troubleshooting, the most frequent mistake is releasing the controls after only five or ten seconds. Hold them for the full period, then give the earbuds a few seconds before trying to pair again.
What to do after resetting Raycon E25 earbuds
After the reset, pair the earbuds as if they were new.
-
Keep both earbuds in the case while Bluetooth is turned off on your phone.
-
Open the case and remove both earbuds.
-
Wait for the earbuds to enter pairing mode.
-
Turn Bluetooth on.
-
Choose Raycon E25 from the available devices.
-
Play audio from one app.
-
Test both earbuds at a low volume.
If the earbuds connect but sound comes from one side, place both buds back in the case and repeat the pairing process. Also check your phone’s audio balance settings. On an iPhone, this is under Accessibility and Audio & Visual. Android menus vary by manufacturer, but the setting is usually called Left/right balance.
When a reset will not solve the problem
A reset cannot fix every earbud issue. Contact Raycon support or consider service if:
• One earbud never lights up after charging.
• The case does not charge.
• The earbuds become hot.
• The audio cuts out even beside the phone.
• The charging pins appear bent or damaged.
• The earbuds suffered water or impact damage.
• The earbuds work with no device after several clean pairing attempts.
Battery wear is another possibility. Small wireless earbuds use rechargeable lithium-ion batteries, and battery capacity naturally declines with age and charging cycles. If an older earbud lasts only a few minutes, resetting it may improve pairing but will not restore battery capacity.
Tips for keeping Raycon E25 earbuds connected
Good care can reduce the need to reset Raycon E25 earbuds.
• Keep the case charged above a very low level.
• Store both earbuds in the case after use.
• Clean the charging contacts once in a while.
• Install phone updates when available.
• Avoid pairing with many devices at the same time.
• Keep the earbuds away from strong moisture and heat.
• Remove unused Bluetooth records from old devices.
Bluetooth earbuds work best when both the hardware and software stay clean. A small amount of dust on a charging contact can create a problem that looks like a serious pairing failure.
Frequently asked questions about how to reset Raycon earbuds E25
How long should I hold the Raycon E25 buttons during a reset?
Hold both earbud buttons or touch controls for about 30 seconds while the earbuds are in the open charging case. If nothing happens, charge the case and earbuds before trying again.
Do I need to forget Raycon E25 from my phone?
Yes, forgetting the old Bluetooth connection is strongly recommended. The phone may keep using an outdated pairing record even after you reset the earbuds.
Why does only one Raycon E25 earbud work after resetting?
The earbuds may not have synced with each other, or one side may not be charging. Put both buds in the case, clean the contacts, reset them together, and remove both earbuds at the same time before pairing.
Will resetting Raycon E25 earbuds delete music or phone data?
No. A reset only affects the earbuds’ connection and pairing state. It does not delete music, apps, contacts, or other files from your phone.
Can I reset Raycon E25 earbuds without the charging case?
The usual reset method requires the charging case because the earbuds need to be placed inside it. If the case is lost or damaged, contact Raycon support for model-specific options.
What if Raycon E25 does not appear in Bluetooth after the reset?
Charge the earbuds, restart your phone, and turn Bluetooth off and on again. Also move away from other devices that may be trying to connect to the earbuds.
Conclusion
Resetting Raycon E25 earbuds usually takes only a few minutes. Charge the case, forget the old Bluetooth connection, place both earbuds in the open case, hold both controls for about 30 seconds, and pair them again.
If the reset fails, focus on charging, cleaning the contacts, testing another device, and checking for physical damage. Try these steps carefully, then visit Raycon support for further help if the earbuds remain unresponsive.
Everett Ashford is a tech reviewer at mytechgrid.com specializing in SSDs, cameras, TVs, earbuds, headphones, and other consumer electronics. He provides honest, data-driven reviews based on hands-on testing and real-world performance analysis. Everett simplifies complex tech details to help readers make smart, confident buying decisions.
